Washington Plumbing & DrainKitsap, Pierce & Mason Counties
Drains & Sewer · Pierce County

Hydro Jetting in Fircrest, WA

Our hydro jetting truck makes regular trips to Fircrest, usually for the same reason: a drain that has been cabled too many times and still will not stay open. Washington Plumbing & Drain cleans the whole pipe wall with high-pressure water and shows you the result on camera.

35 minutes from Port Orchard, over the Narrows Bridge and a few minutes down Highway 16 to the Orchard Street exitfrom Port OrchardPierceCounty
Washington Plumbing & Drain hydro jetting truck with water tank and jetter hose reel parked in Port Orchard — Hydro Jetting for Fircrest homes

What is behind the drywall in Fircrest matters more than most people expect. Platted in the 1920s as a planned garden suburb around the golf course, so the oldest streets have 1920s and 30s Tudor and Colonial homes with basements, cast iron and galvanized. Most of the rest filled in between 1945 and 1970 with brick ramblers and split-levels on copper and cast iron. Very little new construction; the plumbing is old and the houses are well kept. Fircrest sits about 35 minutes from Port Orchard, over the Narrows Bridge and a few minutes down Highway 16 to the Orchard Street exit from our base, close enough that same-day and next-day visits are the norm rather than the exception.

Why hydro jetting is a little different in Fircrest

Wooded lots around Fircrest send fir, cedar and maple roots into any sewer joint that leaks a little water. Jetting with a root nozzle removes the fine hairs a cutting head leaves, and the camera afterward shows where the roots got in so you can plan a repair or a cleaning schedule.

Then there is what is under the yard. A gently rolling glacial plateau between Tacoma and University Place, with gravelly outwash that drains well in most yards and a few low spots near the golf course and Leach Creek that stay wet.

Local conditions that affect hydro jetting in Fircrest

In Fircrest specifically, one issue comes up more than most: Water heaters in original utility rooms and basements aging out

Kitchen drains in Fircrest see the same grease every kitchen does, but the fix lasts longer when the pipe wall is actually clean. We jet the full branch to the main, run hot water behind it, and recommend a schedule only if the line's history calls for one.

Ask a Fircrest homeowner what goes wrong with plumbing here and you will usually hear a version of this: Galvanized supply in 1920s and 30s homes on the original plat

Many Fircrest homes are on private wells, and a well cannot feed a jetter for long. Our truck carries its own water supply, which is the difference between a thorough jetting and a job cut short when the pressure tank runs dry.

Plumber hydro jetting a parking lot storm drain catch basin outside a convenience store
Jetting a commercial storm drain catch basin in a convenience store parking lot — the kind of job that keeps a lot from flooding in a Kitsap downpour.

Signs Fircrest homeowners call us for hydro jetting

Worth a call

  • Grease smell comes up through a kitchen drain even after cleaning
  • A parking lot catch basin overflows during heavy rain
  • Sand or silt keeps settling in a floor or yard drain
  • A plumber told you the only fix was replacement, and you want the pipe cleaned and filmed first
  • The same kitchen or main line has been cabled more than once in the past year

How we handle hydro jetting in Fircrest

When a Fircrest homeowner books hydro jetting, the job unfolds as describe the history, inspect the access and quote, camera the line when the pipe is in question, jet from the downstream end, verify and show you, then set a schedule if the line needs one, and you can watch and ask questions the whole way.

Read the full step-by-step for hydro jetting →

Fircrest neighborhoods and areas we serve

Our Fircrest work runs from Regents Boulevard and the original 1920s plat across to Mildred Street and the University Place line, and out around Thelma Gilmur Park and Fircrest Golf Club. Anywhere inside the Pierce County side of our territory is fair game.

Regents Boulevard and the original 1920s platFircrest Golf Club areaEmerson and AlamedaContra Costa and the south endWhittier Park neighborhoodOrchard Street border with TacomaMildred Street and the University Place line

Hydro Jetting questions from Fircrest

Do you offer scheduled jetting for Fircrest businesses?

We do. Restaurants, apartment complexes and commercial lots in Pierce County use us for quarterly or semiannual grease line and storm drain service, with records kept for each line.

Will you show me the pipe after jetting in Fircrest?

On main lines we run the camera afterward and show you the footage. You see the clean wall and anything that still needs attention, which keeps the conversation about repairs honest.

Do you bring the jetting truck to Fircrest?

Yes. Fircrest is inside our regular service area, and the jetting rig travels anywhere in Pierce County with its own water on board.

How do I know if my Fircrest drain needs jetting or just a cable?

If it has clogged once, a cable is usually enough. If it has clogged repeatedly, drains slowly everywhere, or a camera showed grease or scale on the pipe wall, jetting is the better value. We tell you which before quoting.

Do you need my water to run the jetter?

No. Our jetting truck carries its own water tank, which matters on well properties and on lots with no hose bib near the cleanout. We do not drain your well or pressure tank to clean your sewer.

Our reviews from Fircrest and the rest of Pierce County echo what Kitsap customers say: the price is quoted first, the work is explained, and the plumber cleans up. That is the standard on every job.

Google reviews

Customers on our hydro jetting work

★★★★★
We had a plugged up floor sink in the kitchen. Greg came out and spent four hours here snaking and used the hyro spray. He wasn't willing to have the plug get the best of him. We finally found an outside clean out. The plug was between the clean out and the grease trap. Greg went above and beyond…
Dave Miser · Google review · 2 years ago

Hydro Jetting in Fircrest?

Flat-rate price before we start. Fircrest is about 35 minutes from Port Orchard, over the Narrows Bridge and a few minutes down Highway 16 to the Orchard Street exit.

Call nowRequest service